Satellite Base Station Kit
The Satellite Base Station Kit includes the parts required for a receiver setup based on a Sat-IP all-in-one antenna. The kit is available on Blockstream Store.
Note the Base Station only works in the Ku band. Hence, please make sure you are covered by a Ku-band beam before purchasing it. That is, the Base Station is appropriate for receiving from the Galaxy 18, Eutelsat 113, Telstar 11N (Africa and Europe), and the Telstar 18V Ku-band beam. In contrast, it is incompatible with the C-band beam from Telstar 18V.
If you would like to purchase the parts on your own, you can acquire the following items:
- Selfsat>IP22 all-in-one Sat-IP flat-panel antenna.
- Ethernet Cat5e cable.
- Power over Ethernet (PoE) injector.
The PoE injector is only necessary if the Ethernet port you plan to connect to the Base Station does not support Power over Ethernet (PoE).